PREMIER QUALITY PRODUCTS 55-362449-1 Rear El Wheel Molding Right

( Brand: Premier Quality Products ), ( Manufacturer Part Number: 55-362449-1 ), ( Part Type: Wheel Molding ), ( Model Year Range: 1967 1967 )

Review PREMIER QUALITY PRODUCTS El Wheel Opening Molding Rear fits CAMINO 1967

The 55-362449-1 1967 El Camino Wheel Molding Rear Premier Right is a high-quality, authentic replacement part for your classic Chevrolet El Camino. This wheel molding is designed specifically for the Premier trim level of the 1967 El Camino, ensuring a perfect fit and finish.

The wheel molding is made from durable, weather-resistant materials that are designed to withstand the elements and maintain their appearance over time. The molding features a sleek, contoured design that follows the curve of the wheel well, providing a seamless and attractive look. The finish is a glossy black, which complements the classic styling of the El Camino and adds a touch of sophistication.

Installing this wheel molding is a straightforward process that can be completed in a few hours with basic tools and some patience. The molding comes with all necessary mounting hardware, including screws and clips, to ensure a secure and stable fit. The molding is easy to adjust and align, making it simple to achieve a perfect fit.

Overall, the 55-362449-1 1967 El Camino Wheel Molding Rear Premier Right is a must-have for any El Camino owner looking to restore or maintain the appearance of their classic vehicle. With its high-quality construction, accurate fit, and easy installation, this wheel molding is a great investment for any El Camino enthusiast.

1. Authenticity: This part is an original manufacturer replacement, ensuring that it fits perfectly and matches the original design of your 1967 El Camino.

2. Durability: Made from high-quality materials, this wheel molding is designed to withstand the elements and last for a long time.

3. Easy installation: The molding comes with clear instructions and is relatively easy to install, saving you time and effort.

4. Enhances appearance: The wheel molding adds a finished look to your El Camino, improving its overall appearance and increasing its curb appeal.

1. Price: Original manufacturer replacement parts can be more expensive than aftermarket alternatives.

2. Availability: Depending on where you live, it may be difficult to find this part in stock, and shipping times may be lengthy.

3. Limited customization: Since this is an original part, there may be limited options for customization or personalization.

If you are looking for an authentic, high-quality replacement wheel molding for your 1967 El Camino and are willing to pay a bit more, then the 55-362449-1 1967 El Camino wheel molding rear premier right is a great option. Its durability, easy installation, and ability to enhance your El Camino's appearance make it well worth the investment. However, if you are on a tight budget or prefer customization options, you may want to consider an aftermarket alternative.

If you are looking for a high-quality, original replacement wheel molding for your 1967 El Camino, the 55-362449-1 1967 El Camino wheel molding rear premier right is a great option. Its durability, easy installation, and ability to enhance your El Camino's appearance make it well worth the investment. Just be prepared to pay a bit more for the authenticity and quality.

Details:

This left rear wheel well molding will give your el Camino the classic look it Hans't had in years. Restoration correct wheel opening molding anodized aluminum construction contours and bends crisp lines mounting screws not included are the well moldings on your 1967 el Camino keeping new paint job from looking its best.

Also, the accurately placed mounting holes make for an easier and securer fit on your 1966 el Camino.

specifications etevint:

• for models: Camino
• brand: Premier Quality Products
• mpn: 55-362449-1
• part type: Wheel Molding
• model year range: 1967 1967

Returns etevint:

• policy: returns accepted
• details: No Hassle Returns You may return any part within 60 days from the original ship date There is no need to call for authorization. Complete the form on the back side of your invoice and include it with the parts being returned, cutting out and taping the return label to the box. Please allow up to 3 weeks from date of your return shipment for processing refunds and exchanges. Refunds will be issued in the form of original payment. The parts must be returned in their original packaging within 60 days of the invoice date for a refund of the full purchase price. Important information: Parts returned within 60 days that are not in their original packaging are subject to a 25% restocking fee. Parts returned after 60 days in original packaging are subject to a 25% restocking fee. Parts returned after 60 days not in new condition or not in original packaging will be returned to the customer at customers expense. Ecklers will not accept returns after 60 days. There are no returns on special orders or personalized items. There are no returns on any exhaust Products after installation, on electrical Products, computer chips, scanners, tools, books, videos or CD's. No returns of a partial kits or sets: The parts will be returned back to the customer at the customers expense. Parts returned without customer number, address and invoice number will not be processed for a refund or exchange and will be disposed of in 60 days. COD packages will not be accepted. Return packages must be sent shipping charges prepaid. Ecklers recommends that all returns be insured and shipped with a carrier providing a method of tracking in the event the shipment is lost or damaged. Please return all merchandise to the following address: Ecklers Industries Store ATTN: RETURNS 7980 Grissom Parkway Titusville, FL. 32780 Upon inspection and acceptance of a qualified return, a credit or refund will be issued. Limited Warranty Ecklers Industries will not be responsible for any damage or loss caused by delays, failures or other consequential damage, nor for labor, transportation or any other charges incurred in the replacement or repair of a defective item. Ecklers Industries accepts no responsibility for any consequences resulting from installation on vehicles operating beyond U>speed limits.
• type: Money Back
• time: 60 Days
• paid by: Buyer

Ratings:

1. Great. Highly Recommended A 04-19-18
2. Great! 04-19-18
3. Thank you 04-19-18
4. Perfect condition functionally and cosmetically.Very satisfied. Thanks,Don! 04-19-18
5. GREAT DEAL 04-19-18

General etevint:

• condition: New
• in stock: Yes
• motors > partsaccessories > vintage cartruck parts > exterior motors > other exterior

Shipping etevint:

• handling: 5 days
• type: Calculated

Payments etevint:

• PayPal

Offer etevint:

• Sold: 0
• Started: April 19, 2018, 10:51 pm
• quantity: 4
• best offer: false
• bids: 0

Seller etevint:

• zipcode: 32780
• city: Titusville, Florida

Premier Quality Products 55-362449-1 Is Similar To:

• 16-20003-1 Premier Quality Products Ford Script Emblem Wide High Chrome (53.3% similar) Use 6 of barrel clips to attach with pins. Also 1939 passenger, standard deluxe model's and 1940 has pins on back for mounting, or can be ground off use adhesive to install. Use 6 of barrel clips to attach with pins...(March 18th, 2019)
• 25-100010-1 Premier Quality Products Corvette Rear Lower Filler Panel Without Exhaust (51.2% similar) The result is finest Quality fiberglass body panels that fit right first time and with minimal prep work required. They've tried other brands that just don't measure up to hecklers corvette in Quality, durability, fit, and finish. Hecklers corvette fiberglass body panels are painstakingly reproduced...(April 28th, 2018)
• 25-100016-1 Premier Quality Products Corvette Rear Exahust Filler Exhaust (56.6% similar) Hand laminated fiberglass used when installing side exhaust fills holes in quarter panels heckler select note: require fitting, trimming, shimming, and special finishing...(June 5th, 2018)
• 25-100017-1 Premier Quality Products Corvette Lower Filler Panel Rear (54.1% similar) ...(December 11th, 2018)
• 25-100018-1 Premier Quality Products Corvette Quarter (57.6% similar) Note: fiberglass panels require fitting, trimming, shimming, and special finishing. Hecklers superior hand-rolled fiberglass process eliminates troublesome bubbles and frustrating waves. However, many short cuts were taken to save costs. All of this eliminates hassles, frustrations, and ...(February 23rd, 2017)
• 25-100026-1 Premier Quality Products Corvette Bumper Rear (63.2% similar) 5 oz mat 21 mils of soft sanding gel coat premium Quality - our hand rolled process is stronger free bubbles waves superior strength proper reinforcements save time money precision trimming minimizes prep original 1 piece design, recess for corvette letters made in the USA must use retainers P/N ...(May 17th, 2018)
• 25-100054-1 Premier Quality Products Rear (58.3% similar) 5 oz mat, 21 mils soft sanding gel coat premium Quality - our hand rolled process is stronger free of bubbles waves superior strength proper reinforcements provide long term durability hecklers select series you can trust made in the USA note: fiberglass panels require fitting, trimming, shimming, ...(June 16th, 2017)
• 25-100264-1 Premier Quality Products Split (59.5% similar) All of this eliminates hassles, frustrations, and disappointments while saving you valuable time money. However, many short cuts were taken to save costs. Hecklers corvette fiberglass body panels are painstakingly reproduced from the original gm. 5 ounces of mat and 21 mils soft sanding gel coat. ...(January 24th, 2018)
• 25-100269-1 Premier Quality Products 1963 (53.3% similar) The result is finest Quality fiberglass body panels that fit right first time and with minimal prep work required. Hecklers corvette overbuilds every fiberglass mold with heavy reinforcements to ensure consistent Quality and a superior fit. All of this eliminates hassles, frustrations, and ...(August 3rd, 2017)
• 25-100270-1 Premier Quality Products Corvette Rear Filler Panel With Standard Exhaust (52.4% similar) 5 ounces of mat and 21 mils soft sanding gel coat. They are not built using a chopper gun as with cheaper imitations. During the 1980 S and 1990 'S, several aftermarket companies tried reproducing replacement body panels for Americas favorite sports car. That may be fine for a race car but ...(August 23rd, 2018)
• 25-100275-1 Premier Quality Products Corvette (56.5% similar) Plus press molded bonding strips are ideal for those who want to paint the inside body panels because they already smooth, thus no tedious and expensive sanding finishing is required. From Chevrolet created press molded bonding strips by compressing polyester fiberglass and resin between precision ...(December 12th, 2017)