ECKLERS 49-91738-1 Rear Trunk Floor Brace Die Steel Eckler

( Brand: Ecklers ), ( Manufacturer Part Number: 49-91738-1 ), ( Part Type: Trunk ), ( Model Year Range: 1957 1958 ), ( Oem Part : B7a-11215 )

Review ECKLERS Rear Trunk Floor Brace Oem Die Stamped Steel Eckler fits 1957–1958

The Eckler's 49-91738-1 Rear Trunk Floor Brace is a vital reinforcing component for 1957 and 1958 Chevrolet Bel Air and Impala vehicles. This die-steel brace is meticulously engineered to provide robust support to the vehicle's vulnerable rear trunk floor, ensuring structural integrity and enhancing safety.

Manufactured from high-quality die-steel, this brace offers exceptional strength and durability. Its design closely mirrors the original brace, ensuring a seamless fit and a factory-like appearance. The brace is easily installed, requiring no modification to the vehicle's original floor pan.

The Eckler's 49-91738-1 Rear Trunk Floor Brace not only enhances the vehicle's structural integrity but also contributes to improved handling and stability. By reinforcing the trunk floor, the brace helps to prevent unwanted flex and twist, which can occur during aggressive driving or under heavy loads.

This rear trunk floor brace is a must-have for any classic Chevrolet Bel Air or Impala owner seeking to maintain or restore their vehicle's structural integrity. With its high-quality construction, easy installation, and authentic appearance, this Eckler's product is a reliable solution for enhancing the safety and performance of your classic Chevrolet.

1. Enhances structural integrity: The rear trunk floor brace provides additional support to the vehicle's chassis, reducing the risk of damage or failure due to heavy loads or rough driving.

2. Improves handling and performance: By reinforcing the vehicle's structure, the brace can help improve handling and stability, particularly during high-speed maneuvers or on winding roads.

3. Increases resale value: Installing a high-quality aftermarket part like this can help improve the overall condition of the vehicle, which can lead to a higher resale value when it comes time to sell.

4. Easy installation: The part is designed to be a direct fit for 1957-1958 Chevrolet Bel Airs, making installation relatively straightforward for most DIY enthusiasts.

1. Cost: Aftermarket parts can be more expensive than OEM parts, and this brace is no exception. However, the potential benefits in terms of improved performance and increased resale value may make the investment worthwhile for some.

2. Limited compatibility: While the part is designed to fit 1957-1958 Chevrolet Bel Airs, it may not be compatible with all models or years. It's important to double-check the fitment before making a purchase.

The 49-91738-1 rear trunk floor brace die steel 1957-1958 Eckler is a high-quality aftermarket part that can help enhance the structural integrity and performance of early Chevrolet Bel Airs. While it may be more expensive than OEM parts, the potential benefits in terms of improved handling, increased resale value, and easy installation make it a worthwhile investment for many enthusiasts. However, it's important to double-check the fitment before making a purchase to ensure that it will work with your specific vehicle.

Recommendation: If you are looking to improve the performance and durability of your 1957-1958 Chevrolet Bel Air, the 49-91738-1 rear trunk floor brace die steel 1957-1958 Eckler is a solid choice. It's a high-quality part that is easy to install and can help improve the overall condition of your vehicle, which can lead to a higher resale value when it comes time to sell. However, be sure to double-check the fitment before making a purchase to ensure that it will work with your specific vehicle.

Details:

This 18 gauge steel die-stamped brace is patterned from the original and will fit great.

specifications etevint:

• for years: 1957-1958
• brand: Ecklers
• mpn: 49-91738-1
• part type: Trunk
• model year range: 1957 1958
• oem part : B7a-11215

Shipping etevint:

• type: Flat
• cost: $0.0
• handling: 2 days

Seller etevint:

• zipcode: 14094
• city: Lockport, New York

General etevint:

• in stock: Yes
• motors > partsaccessories > vintage cartruck parts > exterior motors > other exterior
• condition: New

Offer etevint:

• bids: 0
• Sold: 0
• Started: February 24, 2018, 10:32 pm
• quantity: 1
• best offer: false

Ratings:

1. thank you 02-25-18
2. Fast shipping and accurate . Thank you 02-24-18

Payments etevint:

• PayPal

Returns etevint:

• details: Restocking fee: No
• policy: returns accepted
• time: 60 Days
• type: Money Back
• paid by: Buyer

Ecklers 49-91738-1 Is Similar To:

• 28-91640-1 Ecklers Automotive Registration Holder Mounts On Sunvisor Eckler (46.2% similar) Crush grain material spring steel clips to attach visor an excellent reproduction of a hard find accessory, this registration holder has black crushed type as original and keeps your easily accessible. It attaches to sun visor with spring loaded clips, making functional on any vehicle sun visors. ...(July 22nd, 2018)
• 32-12004-1 Ecklers Automotive Windshield Stanchions Stainless Steel With Cups Liners Chopped (23.9% similar) Both stanchions LHS Rh have drilled provisions for side view post mirrors. For stainless post mirror, see PO. There are no pre-drilled holes for side wind wing brackets...(March 31st, 2018)
• 32-12005-1 Ecklers Automotive Windshield Stanchions Stainless Steel With Cups Liners Ford (27.5% similar) Stock height , these are pre-drilled for wind wing brackets only...(September 10th, 2018)
• 32-25221-1 Ecklers Automotive Curb Feelers Chrome Adjustable Eckler (27.5% similar) Adjustable includes hardware. This vintage looking accessory prevents wheel fender damage, keep those wide whites good free of curb rash. Sold as a pair. Sold as a pair...(September 7th, 2018)
• 32-53671-1 Ecklers Automotive Emblem Streetrod Chrome Eckler (27.5% similar) ...(September 6th, 2018)
• 32-94210-1 Ecklers Automotive Double Shaft Style Universal Curb Feelers Pair Eckler (38.4% similar) Great custom look universal curb feeler clamps on - no drilling required easily installed and removed triple nickel plated chrome sold as a pair feelers are one of those accessories which matter taste, but there is argument that few capture nostalgic so many collectors looking for. Did you know: ...(October 17th, 2018)
• 49-94006-1 Ecklers Automotive Rectangular Door Edge Outside Mirror Eckler (43.5% similar) These particular mirrors can be mounted standard door edges or thin window frames without drilling. Quality custom part x 5 stainless steel mirror head 6 long chrome plated zinc die cast arm can be mounted on drivers or passengers side universal application to door edge thin window frame mirrors are...(June 19th, 2018)
• 57-135247-1 Ecklers Chevy Complete Floor Pan With Braces Hardtop (49.1% similar) Chevrolet club coupe 1955 , 1956 , 1957 sports Bela air...(August 21st, 2018)
• 58-94007-1 Ecklers Automotive Round British Style Outside Mirror Left Side Eckler (34.1% similar) These particular mirrors can be mounted to many different surfaces and body angles. Note:this could be used on the passengers side if you desire mirror head to above mounting point. Quality custom part polished stainless steel mirror head chrome die cast arm rubber mounting pad hardware included ...(November 16th, 2018)
• 66-25221-1 Ecklers Automotive Ford Thunderbird Curb Feelers Chrome Adjustable Eckler (30.2% similar) Sold as a pair. Sold as a pair. These vintage looking accessory curb feelers prevent wheel and fender damage keep those whitewalls good free of rash. Adjustable and includes hardware...(June 24th, 2018)
• 80-332379-1 Ecklers Automotive Early Chevy Curb Feelers Eckler (36.5% similar) Great retro accessory universal fit prevents wheel and fender damage adapters P/N valve stem covers sold separately curb feelers add a nostalgic touch to your 1949, 1950, 1951, 1952, 1953 or 1954 Chevrolet. 5 inches long. 5 inches long. Curb feelers are springs installed on the lower part of fender ...(August 4th, 2019)